7 automation, 8 master/slave, 9 tools – Autocue WinCue Pro News Version 1.3 User Manual
Page 57
Advertising
WinCue Pro News User Guide
WinCue Pro News Menus
• 57
6.7
Automation
These functions are only available if you have purchased an Automation Controller,
or.
See the PC90 Stand and PowerPoint sections for more information about setting up
these functions.
6.8
Master/Slave
These functions are only available if you have purchased the master/slave system.
See the Master/Slave section for more information about setting up this function.
6.9
Tools
Toolbar – If you want to remove any of the toolbars from the WinCue Pro News
desktop you can do this from here
Advertising