Metrohm 850 Professional IC Anion MCS LP-Gradient - Manual (Page 49)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
850 Professional IC – Anion – MCS – LP Gradient
￭￭￭￭￭￭￭￭ 39
Table 1 Smallest possible eluent percentage depending on installed
pump head and set flow
Flow Standard pump head Macro pump head
1 mL/min 10 % 2.5 %
2 mL/min 20 % 5 %
3 mL/min not recommended 7.5 %
Depending on the application, an optimal assignment of each eluent to a
valve is documented in the Application Notes. To obtain a reproducible
gradient profile, this eluent-valve assignment must remain unchanged.
Each eluent is degassed by means of its own eluent degasser (see Chapter
3.10, page 37).
1 2 3
4
6
5
7
8 9
Figure 18 Low pressure gradient
1 Mixing valve 2 Eluent degasser
for Eluent B
3 Eluent degasser
for Eluent C 4 Connection tubing 6.1834.100
Connects eluent degasser (18-
3 ) and mixing
valve C. Pre-installed.
5 Eluent inlet C 6 Connection tubing 6.1834.100
Connects the eluent degasser (18-
2 ) and the
mixing valve input B. Pre-installed.
7 Eluent inlet B 8 Eluent inlet A
9 Eluent outlet