Metrohm 850 Professional IC Anion MCS LP-Gradient - Manual (Page 51)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
850 Professional IC – Anion – MCS – LP Gradient
￭￭￭￭￭￭￭￭ 41
Connecting connection tubings
Note
The connection tubings to the inputs B and C are already installed at
the time the instrument is delivered. Only connector A still needs to be
connected.
4
5
1 2 4 5
4 5 3
6
Figure 20 Connecting eluent connection tubings
1 Connection tubing eluent degasser –
mixing valve (6.1834.120) 2 Connection tubing eluent degasser –
mixing valve (6.1834.100)
Pre-installed.
3 Connection tubing eluent degasser –
mixing valve (6.1834.110)
Pre-installed. 4 Backup ring
5 Clamping screw 6 Mixing coil for low pressure gradients
6.2758.020
1 ￭ Plug the connection tubing (20-1) into eluent inlet A and fix in
place with the backup ring (20-4).
￭ Carefully tighten the clamping screw (20-5) with 6.2621.050
wrench.
2 Repeat Step 1 with the other two eluent connection tubings (20-2)
and (20-3).