Figure 19, Connecting mixing coil for low pressure gradients – Metrohm 850 Professional IC Anion MCS LP-Gradient User Manual
Page 50
3.11 Low pressure gradient
■■■■■■■■■■■■■■■■■■■■■■
40
■■■■■■■■
850 Professional IC – Anion – MCS – LP Gradient
Connecting mixing coil for low pressure gradients
2
3
4
1
Figure 19
Connecting mixing coil for low pressure gradients
1
Eluent outlet
2
Pressure screw long
for the connector on the mixing valve.
3
Mixing coil for low pressure gradients
6.2758.020
4
Pressure screw short
for the connection on the high pressure
pump.
1 Screw on the 6.2758.020 mixing coil for low pressure gradients
(19-3) with the 6.2744.090 long PEEK pressure screw (19-2) to the
eluent outlet (19-1).
2 Fasten the other end of the mixing coil for low pressure gradients
(19-3) with the 6.2744.070 short PEEK pressure screw (19-4) directly
to the inlet valve holder of the high pressure pump (see Chapter
3.12.2, page 43).