Chapter 3. installing the usb driver – IDX BMS User Manual
Page 20
User Guide for Battery Management System Ver4.2
Page 20/75
IDX Company, Ltd.
CHAPTER 3.
Installing the USB Driver
Notes for Installation
The following instructions are organized by operating system, due to the different
installation procedures for each system.
1. Installing the USB driver in a PC running Windows XP
Important: If you are installing the USB driver in a PC that is part of a local area network, be sure to log in as an
Administrator or other user having the proper administrator authority over the applicable local
computer. If the driver is installed by a user having no proper authority, some files may not be copied
correctly and errors may generate.
1-1. Connecting the hardware (ESC-4i/VAL-4Si/VL-4Si/BMS-VR) to your PC via a USB cable
will automatically activate the Found New Hardware Wizard. Click Next.
1-2. After selecting Search for the best driver in these locations, select Include this location in the search,
and then enter
“(CD-ROM drive):¥Win2kXP” (for example, if the CD-ROM drive is E, enter “E:¥Win2kXP”)
.
Click Next.