IDX BMS - Manual (Page 45)

User Guide for Battery Management System Ver4.2
Page 45/75 IDX Company, Ltd.
 Battery User ID (F2）
This option is highlighted when a supported battery is connected to the channel. A user selected
name or ID can be stored in the battery. The Battery User ID provides a simple means for
identifying each battery.
The following dialogs are displayed for E-50/E-80/E-10/E-7/E-HL9.
You can set a character string consisting of up to five single-byte alphanumeric. When OK button is
clicked, the setting is written into battery.
The following dialogs are displayed for ELITE.
User can input an ID name or code consisting of up to five alphanumeric digits.
In addition for ELITE the user can set a further identifier of up to sixteen digits can be entered.
When OK button is clicked, the setting is written into the batteries memory.
 Display Update (F3)
Clicking this button will refresh the list and obtain the latest status data from the i-Trax Charger.
 Termination Voltage Setting (F4)
This button becomes selectable when a channel connected to a supported battery is selected.
The i-Trax Charger discharge termination voltage is set. When clicked, the following dialog is displayed.