IDX BMS - Manual (Page 42)

User Guide for Battery Management System Ver4.2
Page 42/75 IDX Company, Ltd.
You can also access the following function buttons.
 Last Full Graph (F1)
This button becomes selectable when a channel connected to a supported battery is selected. Clicking this
button will open the diagnostic screen of the selected battery. If discharge data is available, it will be
displayed. If discharge data is not available, battery data will be displayed. For the Diagnostic screen, refer
to CHAPTER 11.
 Data Archive (F2)
This button becomes selectable when a channel connected to a supported battery is selected. Clicking this
button will open the Data Archive screen of the selected battery. For the Data Archive screen, refer to
CHAPTER 12.
 Data Update (F3)
Clicking this button will refresh the list and obtain the latest status data from the i-Trax Charger.
 Charger Setting (F4)
Clicking this button will display the i-Trax Charger setting screen.
 Close (F7)
Clicking this button will close the i-Trax Charger Menu screen and the program will return to the Main Menu
screen.
The i-Trax Charger Menu screen provides other functions, as explained below.
 If an auto load interval has been set by selecting Auto Update Interval Setup in the Utility Menu screen,
latest data will be loaded automatically from the i-Trax charger at the specified interval. If the system
detects a battery whose BMS recording has completed, the discharge data of the battery will be
automatically saved to the database (this function is effective only for those batteries supported by the
BMS).