IDX BMS - Manual (Page 46)

User Guide for Battery Management System Ver4.2
Page 46/75 IDX Company, Ltd.
Enter a desired Termination Voltage value and then click OK. The setting will be recorded in the i-Trax
Charger.
When the value is changed while “This setting applies to all VM channels” and “This setting applies to all
BP channels “boxes are checked, the same value will be applied to all the channels.
 Load Value (Watts) Setup (F5)
This button becomes selectable when a channel connected to a supported battery is selected.
When clicked, the following dialog is displayed.
Enter a desired load value within the setting range, and then click OK. The setting will be recorded in the
i-Trax Charger.
When the value is changed while “This setting applies to all VM channels” and “This setting applies to all
BP channels “boxes are checked, the same value will be applied to all the channels.
 Close (F7)
Clicking this button will close the screen and the program will return to the i-Trax charger menu.