IDX BMS - Manual (Page 5)

User Guide for Battery Management System Ver4.2
Page 5/75 IDX Company, Ltd.
CHAPTER 2. Installing the Software
Notes for Installation
Installation must occur in the following order:
1. Installation of software
2. Installation of USB driver
If this order is reversed, the system may not operate properly. Therefore, until you are instructed to do so,
do not connect the USB cable. Please close all applications on your PC before installing the BMS
The BMS has been developed for a screen resolution of 1024x768. Lower resolutions will prevent you from
seeing the entire screen on the monitor, necessitating scrolling. To avoid this inconvenience, use a screen
resolution of 1024x768 or higher.
If your PC is part of a local area network, certain restrictions may apply in the installation of software (this
has to do with the administrator authorities). If so, please check with the network administrator before
installing the BMS.
The following instructions are organized by Operating System, due to the different installation procedures
for each system.