Cisco XR 12404 - Manual (Page 33)

1-19
Cisco XR 12404 Router Installation Guide
OL-13830-02
Chapter 1 Cisco XR 12404 Router Overview
Supported Line Cards
Supported Line Cards
The Cisco XR 12404 router is shipped with up to three installed line cards and
one route processor that provide a variety of network media types. Line card slots
and route processors shipped from the factory are based on your order.
Figure 1-10 shows the card cage slot locations:
• Line cards can be installed in slots 1 through 3 in the card cage.
• Slot zero (0) is the default slot for the primary route processor.
• The bottom slot is reserved for the consolidated switch fabric (CSF) card.
Note Refer to the software release notes for a current list of supported line cards (see
the
“Obtaining Documentation and Submitting a Service Request” section on
page -x ).
Figure 1-10 Card Slot Locations
The line cards interface to each other, and to the route processor through the CSF
card. Line cards installed in the Cisco XR 12404 router are hot swappable and can
be replaced while the router is operating.
66252
0
1
2
3
Fabric Alarm
todd.book Page 19 Monday, March 16, 2009 2:47 PM