05 remove the connections cover, 05 remove the connections cover -5, Ultra-cut 300 – Tweco 300 Ultra-Cut(March 2013) User Manual
Page 29
Advertising
Manual No. 0-5134
3-5
INSTALLATION
ULTRA-CUT 300
3.05 Remove the Connections Cover
The primary power cable must be supplied by the end user and connected to the power supply.
Remove the connections cover on the rear of the Power Supply. Use caution when removing the panel; there is a
ground wire connected to the inside of the panel. Do not disconnect this wire.
Connections Cover
(Removed)
Connection Panel
Art # A-04797
Advertising