Ultra-cut 300 – Tweco 300 Ultra-Cut(March 2013) User Manual
Page 47
Advertising
Manual No. 0-5134
3-23
INSTALLATION
ULTRA-CUT 300
Preparation
1. Remove the screws securing the Cover Panel to the Module.
Loosen or remove 2 screws
Remove 2 Screws
Art # A-09144
2. Carefully remove the cover from the module noting the attached wire harness that connects to J4. Remove
the wire harness and then set the cover to the side.
Art # A-09145
Cover Removal
Advertising