Ultra-cut 300 – Tweco 300 Ultra-Cut(March 2013) User Manual
Page 79
Manual No. 0-5134
4-9
OPERATION
ULTRA-CUT 300
Restoring Custom Processes:
During file backup (see previous process) a folder and sub folders called “TD” were placed on your flash drive.
You should copy this folder with its subfolders to some secure place. Making more than one copy is advised. If the
need arises to restore from this backup, place the entire TD folder in the root directory (not in another folder) on a
USB flash drive and plug it into the USB port on the TDC 3000.
1. For the remotely mounted DSC 3000 insert the flash drive in the USB connector on the back. If using the TSC
3000 mounted in the plasma supply front panel the USB connector is in the front under the clear plastic
protective screen.
2. Go to the HOME screen. Select SETUP. Enter the 5 digit password (00000) unless you’ve changed it.
3. Press the “Restore Custom <USB.
Art # A-09235_AB
4. Shortly, almost instantly if only a few files, you should see at the bottom “Status: Copy to .\Files\Custom/
Complete” then you can remove the USB flash drive.