Ultra-cut 300 – Tweco 300 Ultra-Cut(March 2013) User Manual
Page 37
Advertising
Manual No. 0-5134
3-13
INSTALLATION
ULTRA-CUT 300
3.09 Connect Control Cables for CNC, Remote Arc Starter, and DMC-
3000
1. Connect one end of each cable to the power supply.
2. Connect the other end of the CNC cable to the CNC device
.
3. The CNC cable shield must be attached to ground.
RETURN
SUPPLY
Art # A-09129
To CNC Control
To Remote Arc Starter
To DMC-3000
Customer Wiring
Access Hole
Advertising