03 switching vrd on/off, 03 switching vrd on/off -2, Arcmaster 200 ac/dc – Tweco 200 ACDC Arcmaster(April2006) User Manual
Page 58
Advertising
ARCMASTER 200 AC/DC
11-2
April 13, 2006
11.03 SWITCHING VRD ON/OFF
Switch the machine OFF.
A) Remove the clear plastic cover from the control panel. (see Figure 11-1)
1 Lift up the cover so it rests on the top of the unit.
2 Place a small flat bladed screw driver between the cover hinge on the front panel.
3 Gently lift the cover hinge out of the front cover mounting hole.
Remove the control's clear plastic cover.
1
2
2
3
Art # A-07079
Figure 11-1: VRD ON/OFF Step A
B) Remove the four mounting screws from the control panel. (see Figure 11-2)
1
1
1
1
2
Art # A-07080
Figure 11-2: VRD ON/OFF Step B
Advertising