Tweco 500SP PowerMaster Automation - Manual (Page 35)

POWERMASTER 400SP, 500SP AUTOMATION
March 16, 2007 3-11
3.09 Automation Weld Gun
The PowerMaster 400SP and 500SP Automation power supplies can be fitted with any number of TWECO air-
cooled or water-cooled robotic torches and accessories. Contact a TWECO representative or review their
online literature to select the appropriate robotic torch and accessories for your application:
TWECO U.S. Customer Care: 800-426-1888 / FAX 800-535-0557
TWECO International Customer Care: 905-827-9777 / FAX 905-827-9797
TWECO Web Site: www.tweco.com
3.10 Pulsemaster PMA512S-3545 500 Amp Weld Gun (when welding by hand)
For manual welding, Thermal Arc recommends the TWECO Pulsemaster PMA512S-3545 500 AMP gun. Fitted
to the PowerMaster, it offers robust construction, unparalleled reliability and easy replacement of consumable
parts. The TWECO Pulsemaster gun has an operating capacity in excess of the capacity of the PowerMaster
and can be expected to give trouble free service.
Art # A-07922
1
2
3
4
5 6
7
TWECO Pulsemaster PMA5512 500 AMP Weld Gun
Item Description Part No. Qty
1 HEAVY DUTY NOZZLE HD24LP-62-A 1
2 CONTACT TIP 16RZ-XX-A 1
3 HEAVY DUTY GAS DIFFUSER MS5416SW-F 1
4 MACHINED NOZZLE INSULATOR 66J-3A 1
5 CONDUCTOR TUBE PMA65-45S-F 1
6 HANDLE ASSY N/A 1
7 TRIGGER ASSEMBLY PM95-F 1
Original Parts Installed
TWECO Pulsemaster MIG guns may be fitted to many different types of manual MIG welding Power Supplies
so that your whole shop can be converted to TWECO Pulsemaster. Not only will this give greater reliability (and
hence greater productivity) but it will reduce stockholding of consumable parts. See your Thermal Arc distributor
for details.