Fabricator 141i – Tweco Fabricator 141i Operating Manual User Manual
Page 60
Advertising
Fabricator 141i
INSTALLATION, OPERATION AND SETUP
3-30
Manual 0-5145
3. Open the wire compartment door and release the tension knob so the pressure arm and tension knob hang
downwardly.
Art # A-11484
Pressure Arm
Tension Knob
4. Gently push the bottom of the front panel upward until the thumb screw is fully exposed.
Art # A-11485_AB
Thumb Screw
Fully Exposed
Push Upward
5. Remove damaged thumb screw and replace with new one.
Art # A-11486
6. To reassemble, reverse steps 1 through 4.
Advertising