Unitec POS4000/V2 - Manual (Page 12)

POS4000
Document Number: POS4003 4
Document Title: POS4000/V2 Operations Manual
• DEFINE HEADER MESSAGE (see section 6.7.1)
Example to change header message text:
[CMD]
[SET MESSAGES]
[1]
(password 1)
[ENTER]
[MENU UP/DOWN] until "Change Header Msg." appears
[ENTER]
[9][9]
(to change all lines of message)
[ENTER]
[T][H][I][S][ ][I][S][ ][A][ ][T][E][S][T]
(Define Header Message Cont.)
[ENTER]
∗
(repeat for each line)
*
∗
[ENTER]
• DEFINE POSTSCRIPT MESSAGES (see section 6.7.2)
Example to change Postscript message 1:
[CMD]
[Set Messages]
[1]
(password 1)
[ENTER]
[MENU UP/DOWN] until "Change Postscript 1" appears
[ENTER]
[9][9]
(to change all lines of message)
[ENTER]
[T][H][I][S][ ][I][S][ ][A][ ][T][E][S][T]
[ENTER]
∗
(repeat for each line)
∗
[ENTER]