Unitec POS4000/V2 - Manual (Page 92)

POS4000
Document Number: POS4003 84
Document Title: POS4000/V2 Operations Manual
stored by the main console.
To activate backup mode, DIP switch 4 should be moved to the ON position, see
the POS4000 Interface Board Wiring Diagram in the back of this manual for the
location and setting of the DIP switches.
There are 3 passwords that provide access to the programming features of the
backup mode. While the interface board is in backup mode, typing one of the
passwords at the customer keypad will cause the interface board to enter a
programming mode and then wait for the appropriate data to be typed at the
customer keypad.
PASSWORD
TYPE
VALUE
DESCRIPTION
Change-
Password
15627470
(Fixed)
Used to change the
Change- Codes
password
Change-
Codes
23123450
(Changeable)
Used to change the 5
backup customer codes
Change-
Relays
43539210
(Fixed)
Used to change the
relays related to each
customer code
Only the change-codes password can be changed. For this
reason, it is recommended that the manager only give operators the
change-codes password.
Note: