Unitec POS4000/V2 - Manual (Page 34)

POS4000
Document Number: POS4003 26
Document Title: POS4000/V2 Operations Manual
allows you to scroll through the primary menu list (by pressing the [MENU UP] or
[MENU DOWN] key) and then select the command of interest by pressing the
[ENTER] key. The second method allows you to directly access a particular
primary menu command by simply pressing the [CMD] key followed by the
desired command function key (as identified by the text on the management
keys). For example, to print the wash counts report you either press the [MENU
UP] and/or [MENU DOWN] keys until the "Print Audit Counts" menu item
appears on the display and then press the [ENTER] key to select that command
or you can simply press the [CMD] key followed by the [PRINT REPORT] key.
Both methods will activate that primary command.
Many of the console primary commands require a password. Those that do will
prompt for a specific password (password 1, password 2, ...) immediately after
you select that command. To continue with the command, type the appropriate
password (using the numbers printed on the management keys) followed by the
[ENTER] key.
Many of the primary commands have a secondary command menu list. Once
the primary command has been selected and the appropriate password entered,
you scroll through the secondary menu list (using the [MENU UP] and/or [MENU
DOWN] keys) and select the secondary command of interest by pressing the
[ENTER] key.
After a secondary command is executed, the primary command remains
selected. This allows several commands to be executed without having to re-
enter the password. For example, all of the passwords can be changed once the
"Set Passwords" command has been activated. To exit from a secondary menu
and return the console to normal operation, scroll until "Press ENTER to QUIT"
appears and then press the [ENTER] key.