SARGENT Keypad Exit Devices - Manual (Page 15)

Copyright © 2006, 2008, Sargent Manufacturing Company
, an A
SSA ABL
O
Y Group company
. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
800-810-WIRE (9473) • www.sargentlock.com • A7137B
Step #4 Outside Keypad Escutcheon
Outside
of door
Fire
stop
plate
Lower
lug
C
Lower
lug
L
Wires & connector
go through fire
stop plate
INSIDE OF
DOOR
OUTSIDE OF
DOOR
1
2
3
4
5
6
7
8
9
0
*
#
Flat
washer
#8-32 x 1-1/4''
Pan head screw
Connector &
wires through
fire stop plate
6. Insert Wires and Connector
• From the outside of the door through
the Fire Stop Plate (if required)
• For non 12- exit devices feed wire
harness from keypad assembly
through hole in door
• From the inside of the door, use
the #8-32 x 1-1/4" pan head
screw with the flat washer to
attach the Escutcheon using
the lower lug
• Straighten keypad
Escutcheon and tighten
the #8-32 x 1-1/4"
pan head screw
Inside
of door
Outside
of door
Inside of
door
13
4
Mortise Installation Instructions for
KP8900 Series (Continued)