SARGENT Profile Series Cylindrical Locks - Manual (Page 10)

C
o
p
yr
ig
h
t
©
S A
R
G
EN
T
M
a
n
u
fa
c
tu
ri
n
g
. A
ll
r
ig
h
ts
r
e
se
rv
e
d
.
R
e
p
ro
d
u
c
ti
o
n
in
w
h
o
le
o
r
in
p
a rt
w
it
h
o
u
t
th
e
e
xp
re
ss
w
ri
tt
e
n
p
e
rm
is
si
o
n
o
f
S
A
R
G
EN
T
M
a
n
u
fa
c tu
ri
n
g
is
p
ro
h
ib
it
e
d
.
8
800-810-WIRE (9473) • www.sargentlock.com • A7857A
Keypad Programming Instructions for the Profile Series v.G1.5 Lock
Reset Master Code back to factory default (1234) and retain all other User codes
99# Master Code* Yellow LED blinks
40# 00000# 00000# Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks very fast for 10 sec., then slow
* Yellow LED goes out
Note: The factory default Master Code (1234) must be changed (i.e., “Forced Change”) prior to adding any other users.
To Clear the Entire Memory (Master Code defaults to 1234)
99# Master Code* Yellow LED blinks
46# 00000# 00000# Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks very fast for 10 sec., then slow
* Yellow LED goes out
This deletes ALL Codes, including Master, Emergency and Supervisory. The Master Code is set back to 1234*
Sets Unlock Time to 5 seconds. If the Master Code is not known, factory assistance will be required to clear the
memory. Call 1-800-810-9473.
Note: The factory default Master Code (1234) must be changed (i.e., “Forced Change”) prior to adding any other users.
Turn OFF Audio Beep verification on every Key Depression
99# Master Code* Yellow LED blinks
30# 0# 0# (Off) (1# = On) Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly (If solid, see note)
* Yellow LED goes out
Turn ON Yellow LED verification on every Key Depression
99# Master Code* Yellow LED blinks
30# 1# 1# (On) (0# = Off) Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly (If solid, see note)
* Yellow LED goes out
Set Time
99# Master Code* Yellow LED blinks
41# hh:mm# (24hr Format) 0# Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly (If solid, see note)
* Yellow LED goes out
24Hr Format = 1PM = 13, 2PM = 14.......10PM = 22, Midnight = 00 Example 13:15 = 1:15PM
Daylight Savings Time
99# Master Code* Yellow LED blinks
30# 13# 1# (On) (0# = Off) Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly (If solid, see note)
* Yellow LED goes out
Set Date (Today’s Date)
99# Master Code* Yellow LED blinks
42# mmddyy# D.O.W.# (Sunday=1) Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly (If solid, see note)
* Yellow LED goes out
D.O.W. = Day of week
Set Unlock Time
99# Master Code* Yellow LED blinks
11# (1-99 sec.)# 0# Yellow LED blinks
* Yellow LED blinks quickly
* Yellow LED blinks slowly (If solid, see note)
* Yellow LED goes out
The Unlock Time is adjustable for momentary operation. A 5 second unlock time is recommended to extend
battery life. Once the unlock time is entered, it is the same for ALL users except 02.