Mortise installation instructions (continued), Step #4 – outside keypad escutcheon, Step #5 – rail assembly – SARGENT Profile Series Exit Devices User Manual
Page 13: Profile series exit device
11
800-810-WIRE (9473) • www.sargentlock.com • A7455B
Profile Series Exit Device
Copyright © 2003, 2008, Sargent Manufacturing Company
, an A
SSA ABL
O
Y
Group company
. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Step #4 – Outside Keypad Escutcheon
Mortise Installation Instructions (Continued)
Outside
of door
1. Insert Wires and Connector
• From the outside of the door through
the Fire Stop Plate (if required)
• For non 12- exit devices feed wire
harness from keypad assembly
through hole in door
• Straighten keypad escutcheon
and tighten the #8-32 x 1-1/4"
pan head screw
Inside
of door
Wires & Connector
go through fire
stop plate
Step #5 – Rail Assembly
Attach rail assembly according to Exit installation instructions A6705