SARGENT Profile Series Exit Devices - Manual (Page 8)

6
800-810-WIRE (9473) • www.sargentlock.com • A7455B
Profile Series Exit Device
Copyright © 2003, 2008, Sargent Manufacturing Company
, an A
SSA ABL
O
Y
Group company
. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Wires & connector
go through fire
stop plate
Rim Installation Instructions (Continued)
Step #4 – Installation of Outside and Inside Escutcheon
1. Insert wires and connector from the
outside of the door, through the fire
stop plate (if required)
• For non-12- exit devices, feed wire
harness from keypad assembly through
hole in door
• Straighten keypad
escutcheon and tighten
the #8-32 x 1-1/4"
pan head screw
Outside
of door IInside
of door