About row count and spacing, Set planter row count, Set planter row spacing – Great Plains 1625AHL Operator Manual User Manual

Page 162: Row setup, Ab c, Ab c d

Advertising
background image

158

1625AH

Table of Contents

Index

Great Plains Manufacturing, Inc.

411-020M

Table of Contents

Index

2014-04-21

About Row Count and Spacing
On models 1625AHD, leads are connected to seed
sensors first (for example 1…12), and remaining leads to
dry fertilizer blockage sensors (for example 13…24).

Sensors for seed tubes are typically configured for
population (counting seeds), but may alternatively be
configured for blockage.

Set Planter Row Count
The PM400 supports three row configurations
pre-defined by you. You may need only one.

Refer to Figure 136
At first power-up, the PM400 usually has an incorrect row
count for your planter.

10. Press the PLANTER SETUP

key.

Note that the Planter Configuration Indicator

is

under the “1” in the Configuration block

.

This change is for Configuration 1.

11. Press the Right Arrow

key to highlight the

Number of Rows

field

.

12. Press the ENTER

key to modify the # of Rows.

Refer to Figure 137
13. Use the Left and Right Arrow keys (

or

) to

select the digits to modify. Use the Up or Down
Arrow keys (

or

) to increment or decrement.

Change the row count to the table value for your
planter model and operating configuration.

14. Press the ENTER

key to save the correct row

count.

Set Planter Row Spacing
15. Press the Down Arrow key

to select the Row

Spacing field

.

16. Use the Left and Right Arrow keys (

or

) to

select the digits to modify. Use the Up or Down
Arrow keys (

or

) to increment or decrement.

Change the row spacing to the value for your planter
model (70 cm).

17. Press the ENTER

key to save the corrected row

spacing.

Row Setup
18. Use Right Arrow key

to navigate to the “I/O”

field

.

19. Use the Left and Right Arrow keys (

or

) to

select a seeding icon

for the number of seed

rows (rows 1…12 in this example).

20. For row numbers above the seeding rows, use the

Up or Down Arrow keys (

or

) to change it to a

blockage icon

(rows 13…24 in this example).

21. Press the ENTER

key to save a revised row

configuration.

Figure 136

Planter Default Setup

31934

a

b

c

Figure 137

12-Row with Fertilizer Blockage

36250

a

b

c

d

a

b

d

Advertising
This manual is related to the following products: