Great Plains 3S-3000F Predelivery Manual - Manual (Page 10)

8
Section 1 Assembly
3S-3000 Three-Section Folding Drill 195-144M 8/9/06
Great Plains Mfg., Inc.
Installing the Center Box Frame
Refer to Figure 1-5:
Pin the drill hitch to a tractor with a minimum of 100 horse-
power to secure the drill frame for further assembly. Cen-
ter the center box frame assembly (#1) behind the
mainframe and bolt it in place with the eight 7/8" x 2 3/4" bolts
(#2), 7/8" flat washers (#3), 7/8" lock washers (#4), 7/8" nuts
(#5). Lightly tighten the bolts at this time, but do not torque
them until the box is leveled later in the assembly process.
Refer to Leveling The Drill in this section on page 12.
Center Box Frame Installation
Figure 1-5
15609