Great Plains 3S-3000F Predelivery Manual - Manual (Page 4)

2
Introduction
3S-3000 Three-Section Folding Drill 195-144M 8/9/06
Great Plains Mfg., Inc.
Introduction
and should only be replaced with genuine Great Plains
parts.
For prompt service always use the serial number and model
number when ordering parts from your Great Plains dealer.
Be sure to include your serial and model numbers in corre-
spondence also.
Great Plains Manufacturing wants the customer to be sat-
isfied with any new machine. Completely read this manual
before attempting to assemble or set up a new drill. If for
any reason you do not understand any part of this manual,
or have other assembly or setup questions, assistance is
available.
For further assistance contact:
Product Support
Great Plains Mfg. Inc., Service Department
P.O. Box 5060
Salina, KS 67402-5060
Using This Manual
Terminology:
"Right " or "Left" as used in this manual is determined by
facing the direction the machine will travel while in use un-
less otherwise stated.
Definitions:
IMPORTANT: A special point of information that the author
feels you must be aware of before continuing with the in-
structions that follow.
Assembly & Setup Assistance
If customer service or repair parts are required contact
your local Great Plains dealer. He has trained personnel,
repair parts, and the equipment needed to service your
implement. These parts have been specially designed
NOTE: A special point of information related to it’s
preceding topic. The author’s intention is that you
read and note this information before continuing.