Great Plains 3S-3000F Predelivery Manual - Manual (Page 17)

15
Section 2 Setup
8/9/06 3S-3000 Three-Section Folding Drill 195-144M
Great Plains Mfg., Inc.
Transfer Drive Shaft Vertical Adjustment
Figure 2-7 15621
To align the clutch jaws in the vertical direction, loosen the
two 5/8" bolts (#1) on the break-away adjustment plate at the back side of the toolbar and slide the 1/2" plate (#2) up
or down in the desired direction, as shown in Figure 2-7.