ADS Environmental Services FlowShark QR 775002 A4 - Manual (Page 105)

4-24 ADS FlowShark Manual
Installation with antenna cable coiled in manhole
21. Seal the space between the antenna cable and the corbel hole
with electrical duct seal or as required to prevent infiltration
into the manhole.
22. Attach the connector at the end of the antenna cable to the
RADIO connector port on top of the monitor.
Note: If the antenna cable has the SMA connector, first
attach the SMA-to-TNC adaptor to the RADIO connector
port on the monitor and then attach the cable connector to
the adaptor.