ADS Environmental Services FlowShark QR 775002 A4 - Manual (Page 155)

Configuration and Activation 6-29
2. Select the Connect button to establish communication with the
monitor.
Profile initiates communication with the monitor and establishes a
connection.
Monitor Diagnostics dialog during communication with a monitor
3. (Diagnostics for Ultrasonic Device only) Run diagnostics on
the ultrasonic device as follows:
 Select the Ultrasonic 1 device from the Diagnose Device
drop-down list, and then select the Diagnose button.
The Diagnostics dialog displays the current configuration
parameters stored in the LIF for the Ultrasonic 1 device.