Bio-Rad PROTEAN® IEF Cell Accessories - Manual (Page 31)

6. When the cell cover is opened during a run the
power supply is paused.
Close the lid to proceed to the method paused
screen.
7. Method is Paused screen is displayed when the
button is pressed.
Press the adjacent softkey to edit the number of
gels if any have been removed.
Select EDIT METHOD to edit the current
method. (See Section 7 for real time editing.)
Press key to continue method.
8. Final Run Screen (Stopped or Finished)
The final run screen is displayed when a
method is completed or is stopped during the
run.
• The actual / set temperature is displayed.
• The total volt-hours listed are cumulative
but do not include the rehydration step
(active).
• The Method Name and STOPPED or
FINISHED is displayed.
Press the to return to the main screen.
9. Hold Screen Display of Preset Methods
This screen lists the holding voltage, total
current, and current per gel.
The VH listed are the total volthours of the
completed method excluding the hold step.
The displayed time is the elapsed time of the
hold step.
The HOLD VH displayed is the elapsed
volthours for the hold step only.
28
S 04/04 500V XXµA
20/20 °C XXµA/gel
VH: 000000 00:00
HOLD VH:XXXX HOLDING
500V - PRESS (Stop key
symbol) TO STOP
(scrolled message)
S #/# 0 V 0 µA
20/20 °C 0 µA/gel
VH: 000000 00:00/00:01
" METHOD NAME" FINISHED
** CELL COVER OPEN **
POWER SUPPLY PAUSED
CLOSE COVER TO PROCEED
METHOD IS PAUSED.
EDIT # OF GELS: # >
EDIT METHOD >
PRESS TO CONTINUE