Bio-Rad PROTEAN® IEF Cell Accessories - Manual (Page 5)

2
1.3 Specifications
Input power 90–264 VAC, 47–63 Hz
Fuse 10A, 250 V, SLO-BLOW, 3AB Ceramic Body
Input power cord 3-wire; grounded
Power outputs
Voltage 50–10,000 V, 1 V increments
Current 0–2.4 mA, 0.01 µA increments
Power 0–24 Watts
Time 00:01–99:00 hours:minutes or 0–99,999 volt-hours
Focusing trays
Material Polycarbonate
Strip size 7, 17 cm
Capacity 12 strips per tray
7 cm 17 cm
Electrode distance 64.5 mm 162 mm
Accommodates total strip length 82.3 mm 181 mm
Peltier platform
Tray capacity One 17 cm tray or two 7 cm trays
Temperature 10–25 °C ± 0.5 °C @ max. ambient of 30 °C
15–25 °C ± 0.5 °C @ max. ambient of 35 °C
Rehydration/equilibration trays
Material Polystyrene
Capacity 12 strips per tray
Accommodates total strip length 80 mm for 7 cm tray, 186 mm for 17 cm tray
Environmental requirements For indoor use only.
For use at altitudes up to 2000 meters.
To be operated between 10 °C and 35 °C ambient.
To be operated with a maximum relative humidity
or 90% for temperatures up to 35 °C.
Regulatory CE, EN61010-1
Dimensions 28(W)x30(D)x14(H) cm
Weight 12.5 lb. (5.7 kg)
User interface
Control panel 12 key alpha-numeric keypad with 4 soft-keys and
3 function keys.
Graphics display, 4 lines x 21 characters
Programmable Rehydration and focusing time, platform temperature,
parameters current limit per IPG strip, voltage and voltage
ramping type for each step.
Voltage Ramping Profiles Slow, Linear or Rapid
Protocol capacity Three semi-programmable, pre-loaded methods.
Ten programmable methods with up to ten (10)
steps.
Data collection RS232 serial port and optional thermal printer
1.4 Unpacking
When you receive the PROTEAN IEF Cell, carefully inspect the shipping container for
any damage which may have occurred during shipping. Severe damage to a container may
indicate damage to its contents. If you suspect damage to the contents may have occurred,
immediately file a claim with the carrier in accordance with their instructions before
contacting Bio-Rad Laboratories.
Open the shipping carton and lift the contents out of its packing. Inspect the instrument
for external damage. If any part is missing or damaged, contact Bio-Rad Laboratories
immediately.