Bio-Rad PROTEAN® IEF Cell Accessories - Manual (Page 43)

Thermal Printer Preset DIP Switch Settings (for use with the PROTEAN IEF
Cell
DIP SW-1
1 (OFF) : Input = Serial
2 (ON) : Printing Speed = High
3 (ON) : Auto loading = ON
4 (OFF) : Auto LF = OFF
5 (ON) : Setting Command = enable
6 (OFF) : Printing
7 (ON) : Density
8 (ON) : = 100%
DIP SW-2
1 (ON) : Printing Columns = 40
2 (ON) : User Font Back-up = ON
3 (ON) : Character Select = Normal
4 (ON) : Zero - Normal
5 (ON) : International
6 (ON) : Character
7 (ON) : Set
8 (OFF) : = U.S.A.
DIP SW-3
1 (ON) : Data Length = 8 bits
2 (ON) : Parity Setting = No
3 (ON) : Parity Condition - Odd
4 (OFF) : Busy Control = XON/XOFF
5 (OFF) : Baud
6 (ON) : Rate
7 (ON) : Select
8 (ON) : = 9600 bps
(Refer to the Printer Manual for details on changing the DIP switch setting)
40