Bio-Rad Image Lab™ Software - Manual (Page 123)

Displaying Data
User Guide | 123
Identify Bands by
You can change how the bands are labeled by choosing from the options in the
Identify Bands by dropdown list. By default, the bands are labeled by band number.
You can display one of the following attributes:
 Band Number (Band No.)
 Band Label
 Molecular Weight (Mol. Wt.)
 Relative Front
 Volume
 Absolute Quantity (Abs. Quant.)
 Relative Quantity (Rel. Quant.)
 Band %
 Lane %
 Normalization Factor (multichannel images only)
 Normalization Volume (multichannel images only)
Adjusting Band Boundaries
Below the profile of each lane there is a strip that displays the bands. Each band is
surrounded by a pair of vertical lines delimiting its boundaries. You can move the
vertical lines and change these boundaries.
To change the boundaries of a band
1. Hold your cursor over one of the boundary lines until a double arrow appears.
2. Click and drag the cursor to the new position.
Note: Boundary lines cannot overlap one another. Therefore, you will not
be able to move any boundary line beyond the next boundary line.