Bio-Rad Image Lab™ Software - Manual (Page 20)

1 | Introduction
20 | ChemiDoc MP Imaging System with Image Lab Software
Optional Accessories
Bio-Rad Laboratories, Inc. offers a selection of optional filters and illumination
sources. See Ordering Information on page 243 for a complete listing of accessory
filters, UV light sources, optional parts, and replacement parts.
Printer
For your convenience, Bio-Rad offers an optional USB printer for use with the
ChemiDoc MP system: the Mitsubishi thermal printer (catalog #170-8089).
Conversion Screens
White Light Conversion Screen
The white light conversion screen is a phosphor screen that produces white light
transillumination when placed on top of the UV transilluminator.
XcitaBlue Conversion Screen
The optional XcitaBlue™ screen kit (catalog # 170-8182) converts UV to blue light,
which enables you to visualize DNA samples while protecting them from UV
damage.
Optional Light Sources
Red LED Module
The optional red LED module kit contains the emission filter and excitation source
for fluorescent applications. Instructions are also included.
Green LED Module
The optional green LED module kit contains the emission filter and excitation source
for fluorescent applications. Instructions are also included.
Blue LED Module
The optional blue LED module kit contains the emission filter and excitation source
for fluorescent applications. Instructions are also included.