Bio-Rad Image Lab™ Software - Manual (Page 128)

6 | Analyzing Images
128 | ChemiDoc MP Imaging System with Image Lab Software
Using Auto Analysis
Auto analysis detects the lanes and bands and, optionally, calculates the molecular
weight of the bands in your image. Click Auto-Analysis in the Analysis Tool Box to
do the following:
 Analyze images obtained with protocols that did not include steps for auto
detection and analysis
 Change your analysis parameters to reanalyze your images
Note: If you change any settings for an analyzed gel, the initial analysis is
overwritten. To preserve both analyses, save each image file with a different
name.
Note: The Band Detection Sensitivity and Molecular Weight Analysis Settings
are applied to all channels in a multichannel image. If you want to use different
sensitivity levels to detect bands in each channel, use the Lane and Bands
tools.
Auto Detection Settings