Bio-Rad Image Lab™ Software - Manual (Page 188)

9 | System Calibration
188 | ChemiDoc MP Imaging System with Image Lab Software
Recalibrating Your Imager
When you add light sources or filters to a ChemiDoc™ MP imager, recalibrate your
imager using the Instrument Setup dialog box.
To recalibrate your imager
1. In Image Lab, click Edit > Instrument Setup to open the Instrument Setup dialog
box.
 If you are adding a new light conversion screen (refer to UV/White Light
Conversion Screen on page 236 ), select the appropriate box in the
Illumination Options field.
 If you are adding additional filters, select the appropriate box in the Filter
Options field.