Canon mx860 - Manual (Page 13)

Advanced Guide Troubleshooting
Contents > Overview of the Machine > How to Navigate Menus on the LCD
How to Navigate Menus on the LCD
You can use the machine to print photos in a memory card, make copies, send/receive faxes, or scan
originals without a computer. You can also make good use of the various functions of the machine with
the menu screen and the settings screen on the LCD.
This section describes the basic operation to use the menu screen and the settings screen in each
mode.
Basic Operation in Each Mode
Basic Operation on the Settings Screen
Basic Operation in Each Mode
Press the mode button (A) to switch the screen to the desired mode first.
Then, use the Menu button (B) to select available functions in each mode.
To change the page size, media type, or image correction, press the Settings button (C).
Note
Use the (Up), (Down), (Left), or (Right) button to select the item, and press the OK
button to set it.
You can return the LCD to the previous screen by pressing the Back button.
Press the SCAN button to display the Scanned data processing screen, then select whether to
save scanned data in a computer or on a USB flash drive or a memory card inserted in the
machine.
Press the MEMORY CARD button to display the Card menu screen, and select whether to select
and print a photo in a memory card or use various layouts.
For details on each item, see Menu Screens .
To select Maintenance or Device settings, press the Menu button to display the Settings menu in
any mode.
Menu Screens
Note
For details on maintenance, see Routine Maintenance .
Copy mode
Copy menu screen
Standard copy: See Copying .
Special copy: See Using Various Copy Functions .
Two-sided copy
2-on-1 copy
Page 13 of 997 pages How to Navigate Menus on the LCD