Canon mx860 - Manual (Page 864)

Advanced Guide > Troubleshooting > Document Jams in the ADF
Document Jams in the ADF
Important
When you turn off the machine to remove the jammed document, make sure of the following.
While the machine is receiving a fax (in memory), you cannot turn off the machine. Turn it off after
receiving the fax. Do not disconnect the power plug while the machine is receiving a fax. If you
disconnect the power plug, all the documents stored in memory are deleted.
If the Stop button is pressed while the machine is scanning the document:
If you press the Stop button during scanning, Document in ADF. Redo operation after checking
document in ADF and pressing OK. appears on the LCD. Press the
OK button so that the
remaining document is automatically fed out.
Removing the jammed document from the Document Tray:
Remove the document following the procedure below.
1. If printing is in progress, press the Stop button.
2.
Turn off the machine.
3.
If a multi-page document is loaded, remove any pages other than the jammed page from
the ADF, then open the Document Feeder Cover.
4. Raise the Paper Release Lever (A), then remove the jammed page from under the roller to
the Document Feeder Cover side.
5. Pull out the jammed document from the ADF.
If the document cannot be pulled out with ease, follow the procedure in Removing the
jammed document from the inner side of the Document Cover: .
Page 864 of 997 pages Document Jams in the ADF