Canon mx860 - Manual (Page 713)

1. Load paper.
Refer to Loading Paper / Originals .
2.
Press the FAX button, then press the Menu button.
The FAX menu screen is displayed.
3.
Use the button to select Print reports/lists, then press the OK button.
4. Use the button to select Caller history list, then press the OK button.
5. Use the button to select Yes, then press the OK button.
The Caller history list is printed.
TX Report
This machine can print a TX (transmission) report after sending a document, confirming whether
the transmission has been completed successfully. At the time of purchase, TX reports are set to
be printed only when a transmission error occurred. You can set the machine to print a report each
time it sends a document, or disable printing of the report.
Note
For details on the TX report settings, see TX report .
For the errors that occur when you send a fax, see Errors when you send a fax .
Errors when you send a fax
If an error occurs when you send a fax, the error number is printed in the TX report (there are some
errors for which the cause is also printed).
The causes corresponding to the error numbers are as follows.
No. Cause Action
#001 Document is jammed in
the ADF.
The document is jammed in the ADF.
Remove the document page jammed in the
ADF. When the error is cleared, redo the
operation. See
Document Jams in the ADF .
#003 Document is too long. You attempted to send a document longer than
15.75 inches / 400 mm.
You cannot send a document longer than
15.75 inches / 400 mm from the ADF.
#003 is also printed if it takes time to send a
Page 713 of 997 pages Summary of Reports and Lists