Canon mx860 - Manual (Page 795)

Set month: Specify the month.
Set week: Specify the week.
Set day of week: Specify the day of the week.
Set shift time: Specify the hour (24-hour clock).
End date/time
Sets the date and time that summer time ends.
Set month: Specify the month.
Set week: Specify the week.
Set day of week: Specify the day of the week.
Set shift time: Specify the hour (24-hour clock).
Unit name/TEL no. registr.
Registers your name and fax/telephone number printed on sent faxes.
Specifying the Basic Settings for the Machine
TTI position
Selects the position of the sender information (outside or inside the image area). After
selecting the position, select FAX or TEL to specify the mark to appear before the fax/
telephone number printed on sent faxes.
Specifying the Basic Settings for the Machine
Offhook alarm
Enables/disables the alarm that alerts you if the handset of the telephone connected to the
machine is not hung up properly.
Volume control
RX ring volume: Selects the ring volume when the machine receives a fax.
Line monitor volume: Selects the line monitor volume.
RX ring level
Adjusts the level of the ringing sound the machine makes when it receives a fax. You can
select either Standard or High.
Telephone line type
Specifies the type of telephone line connected to the machine (Rotary pulse or Touch tone).
Confirming the Telephone Line Connection
Note
This setting may not be available depending on the country or region of purchase.
Activity report
Sets whether to print the Activity report automatically after every 20 transactions.
Activity Report
Transmission settings
ECM TX
This machine is set to send/receive faxes in Error Correction Mode (ECM) by default.
Transmission/Reception of Faxes Using ECM
When the recipient's fax machine is compatible with ECM, the machine resends the fax after
Page 795 of 997 pages FAX settings