Canon mx860 - Manual (Page 167)

Paper Does Not Feed Properly
Paper Does Not Feed from the Paper Source Specified in the
Printer Driver
Paper Jams
Document Jams in the ADF
If the Stop button is pressed while the machine is
scanning the document:
Removing the jammed document from the Document
Tray:
Removing the jammed document from the inner side of
the Document Cover:
Removing the jammed document from the Document
Output Slot:
Message Appears on the Computer Screen
B200 Printer error has occurred. Unplug the power cord
and contact the service center. Is Displayed
**** Printer error has occurred. Turn off power then back
on again. If problem persists, see the manual. Is
Displayed
Error Regarding Automatic Duplex Printing Is Displayed
Writing Error/Output Error/Communication Error
Error Number: 300 Is Displayed
Error Number: 1700 Is Displayed
Ink Info Number: 1600 Is Displayed
Ink Info Number: 1683 Is Displayed
Ink Info Number: 1688 Is Displayed
Error Number: 2001 Is Displayed
Error Number: 2002 Is Displayed
Other Error Messages
The Inkjet Printer/Scanner/Fax Extended Survey Program
Screen Is Displayed
The Inkjet Printer/Scanner/Fax Extended Survey Program
Icon Appears
Cannot Print Properly with Automatic Duplex Printing
For Windows Users
Printer Status Monitor Is Not Displayed
Error Message Appears on a PictBridge Compliant Device
Cannot Print Properly from a Wireless Communication Device
Cannot Print Properly from a Photo Index Sheet
Cannot Remove a Memory Card
Problems with Scanning
Scanner Does Not Work
ScanGear (Scanner Driver) Does Not Start
Error Message Appears and the ScanGear (Scanner
Driver) Screen Does Not Appear
Scan Quality (Image Displayed on the Monitor) Is Poor
Scanned Image Is Surrounded by Extra White Areas
Cannot Scan Properly with Multi Crop
Cannot Scan Properly in Auto Scan Mode
Slow Scanning Speed
"There is not enough memory." Message Is Displayed
Computer Stops Operating during Scanning
Scanner Does Not Work After Upgrading Windows
Page 167 of 997 pages MX860 series Advanced Guide