Canon mx860 - Manual (Page 43)

(2) Use the (Up) or (Down) button or Numeric button to specify the number of
copies.
(3) Repeat the procedures of (1) and (2) to specify the number of copies for each
photo.
Note
Other options
To change the display of photos, see Changing the Display .
To crop a part of photo (Trimming), see Cropping a Part of Photo .
(4) Press the OK button.
The print confirmation screen will appear.
4.
Start printing.
(1) Confirm the page size, media type, print quality, etc.
Here we confirm that 4"x6"(10x15cm) is selected for Page size and the type of loaded photo paper for
Media type.
To change the settings, press the Settings button to select the item to change.
See Basic Operation on the Settings Screen and Changing the Settings .
Note
When Plain paper is selected for Media type and A4 or 8.5"x11"(LTR) for Page size, the
arrow image will appear at the Cassette as shown in the figure below.
When other sizes or types of paper are selected, the arrow image (A) will appear at the
Rear Tray.
Confirm that the selected paper is loaded in the correct paper source.
(2) Confirm the number of sheets to be used for printing the selected photos.
(3) Press the Color button.
The machine starts printing photos.
Note
Press the Stop button to cancel printing.
Printing does not start if you press the Black button.
You can display the Card menu screen and select other useful printing functions, if you press
the Back button after printing is completed.
To remove the memory card, see Removing the Memory Card .
Changing the Settings
You can use the Settings button to change the print settings such as page size, media type, or print
quality to print.
For details, see
Basic Operation on the Settings Screen .
Page 43 of 997 pages Printing Photos Saved on the Memory Card