Canon mx860 User Manual
Page 407
Advanced Guide
>
Printing Using the Operation Panel of the Machine
>
Printing from a Memory Card
> Setting Up the
Card Slot as the Memory Card Drive of the Computer
Setting Up the Card Slot as the Memory Card Drive of the
Computer
The Card Slot of the machine can also be used as the memory card drive of the computer.
Note
For details on using the Card Slot over a network, see
Using the Card Slot over a Network
.
In Macintosh, you cannot write data to a memory card in the Card Slot over a network.
Important
When Read/write attribute in Advanced settings under Device settings is set to Writable from USB
PC or Writable from LAN PC using the Operation Panel of the machine, card direct printing cannot
be done. After using the Card Slot as the memory card drive of the computer, remove the memory
card, then be sure to set Read/write attribute to Not writable from PC. When you turned off the
machine, Writable from USB PC or Writable from LAN PC will be canceled and the setting is
returned to Not writable from PC when you turn on the machine next time.
1.
Make sure that the memory card is not set.
If the memory card is set, remove it from the Card Slot. For details, refer to
Printing from a Memory
Card
.
2.
Press the
Menu
button.
3.
Use the
button to select
Settings, then press the
OK
button.
4.
Use the
button to select
Device settings, then press the
OK
button.
5.
Use the
button to select Advanced settings, then press the
OK
button.
6.
Use the
button to select Read/write attribute, then press the
OK
button.
7.
Specify the read/write attribute.
Not writable from PC
The Card Slot is used only for reading. Be sure to select this mode when printing photos from a
memory card.
Writable from USB PC
The Card Slot is used as the memory card drive of a computer connected to the machine via USB.
Data can be written on the memory card from the computer.
Writable from LAN PC
The Card Slot is used as the memory card drive of a computer connected to the machine via a
network. Data can be written on the memory card from the computer.
8.
Press the
OK
button.
Important
If you used the Card Slot as the memory card drive of the computer, you need to perform a "safe
removal" operation on your computer before physically removing the memory card from your
machine.
In Windows, right-click the
Removable Disk icon and click Eject. If Eject is not displayed on
the screen, confirm that the Access lamp is not flashing and remove the memory card.
Over a network, the removal operation is not needed.
Page 407 of 997 pages
Setting Up the Card Slot as the Memory Card Drive of the Computer