Canon mx860 - Manual (Page 694)

Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Changing the Print
Settings
Changing the Print Settings
This machine prints received faxes to paper loaded in the machine beforehand. You can use the
Operation Panel to change the paper settings for printing faxes. Make sure that the settings are
appropriate for the loaded paper.
Important
MX860 series
Load Legal-sized paper on the Rear Tray. Only A4 or Letter-sized paper can be fed from the
Cassette.
If paper other than A4, Letter-, or Legal-sized paper is loaded, the received faxes are stored in
memory and Check the page size and press OK. is displayed on the LCD. In this case, replace the
loaded paper with A4, Letter-, or Legal-sized* paper, then press the
OK button.
You can also press the Stop button to close the message and print the stored documents in
memory later. For details, see Printing a Document in Memory .
* Legal may not be available depending on the country or region of purchase.
If no paper is loaded in the specified paper source, or paper has run out while printing is in
progress, the received faxes are stored in memory and There is no paper. Load paper and press
OK. is displayed on the LCD. In this case, load paper in the Cassette (MX860 series) or on the Rear
Tray and press the
OK button.
You can also press the Stop button to close the message and print the stored documents in
memory later. For details, see Printing a Document in Memory .
Note
If the sender sends a document that is larger than Letter-size or Legal-size, such as 11" x17", the
sender's machine may send the fax automatically reduced in size or divided, or send only a part of
the original.
Setting Items
Press the Settings button in the fax mode. Use the button to select the setting item. Use the
button to change the setting.
1.
Page size
Select the page size from A4, 8.5"x11"(LTR), or 8.5"x14"(Legal).
2.
Media type
The paper type is set to Plain paper.
3.
Auto feed sw. (MX860 series)
Select whether to switch the paper source automatically.
Note
MX860 series
When 8.5"x14"(Legal) is selected as the page size, you cannot select a paper source
other than the Rear Tray.
MX860 series
Page 694 of 997 pages Changing the Print Settings