Canon mx860 - Manual (Page 796)

correcting errors automatically. When the recipient's fax machine is not compatible with ECM,
the fax will be sent/received in the standard mode.
ECM transmission can be disabled.
Pause time settings
Sets the length of time paused for each press of the Redial/Pause button.
Auto redial
Enables/disables automatic redialing.
Resending Faxes (Redialing a Busy Number)
If you select ON, you can specify the maximum number of redial attempts and the length of
time the machine waits between redial attempts.
TX start speed
Selects the fax transmission speed.
Color transmission
When faxing color documents using the ADF, selects whether to scan it in black & white if the
recipient's fax machine does not support color faxing.
TX report
Enables/disables automatic printing of a transmission report after a fax transmission.
TX Report
If you select Print error only or Print for each TX, you can enable/disable printing of the first
page of the fax under the report.
Dial tone detect
Avoids mistransmission when reception and transmission occur at the same time.
If you select ON, the machine transmits the fax after confirming the dial tone.
This setting may not be supported depending on the country or region of purchase.
Fax number re-entry
If you select ON, you can set the machine to send faxes after using the Numeric buttons to dial
the number twice. By using this setting, you can avoid the mistransmission of faxes.
Check RX fax info
If you select ON, the machine checks whether the recipient's fax machine information
matches the dialed number. If it matches the number, the machine starts to send faxes.
Hook key setting (MX860 series)
If you select Disable, any operations using the Hook button is invalid.
Reception settings
ECM RX
This machine is set to send/receive faxes in Error Correction Mode (ECM) by default.
Transmission/Reception of Faxes Using ECM
When the sender's fax machine is compatible with ECM, it resends the fax after correcting
errors automatically. When the sender's fax machine is not compatible with ECM, the fax will
Page 796 of 997 pages FAX settings