Scanning in basic mode – Canon mx860 User Manual
Page 592
Advanced Guide
>
Scanning
>
Scanning with Other Application Software
>
Scanning with Advanced Settings Using
ScanGear (Scanner Driver)
> Scanning in Basic Mode
Scanning in Basic Mode
In Basic Mode, you can scan easily by following the on-screen steps.
When scanning from the ADF (Auto Document Feeder), documents are scanned without preview. Also,
the paper size is set to A4.
1.
Place the documents on the Platen or ADF (Auto Document Feeder), then start
ScanGear (scanner driver).
Starting ScanGear (Scanner Driver)
Important
When scanning from the Platen, place the document face-down on the Platen and align an
upper corner of the document with the corner at the arrow of the Platen. See "
Placing
Documents (ADF (Auto Document Feeder))
" for details on how to place documents when
scanning from the ADF (Auto Document Feeder).
2.
Set Select Source according to the documents.
Important
Some applications do not support continuous scanning from the ADF (Auto Document Feeder).
For details, refer to the application's manual.
Note
To scan magazines containing many color photos, scan in Advanced Mode tab with Color
Mode set to Color and Descreen set to ON.
Scanning in Advanced Mode
3.
Click Preview.
Preview image appears in the Preview area.
Page 592 of 997 pages
Scanning in Basic Mode