Lcd cannot be seen at all – Canon mx860 User Manual
Page 830
Advertising
Advanced Guide
>
Troubleshooting
> LCD Cannot Be Seen At All
LCD Cannot Be Seen At All
If all the lamps on the Operation Panel are off
The machine is not powered on. Connect the power cord and press the
ON
button.
If one of the mode buttons (e.g., the COPY button) is lit
The LCD may be in the screen-saver mode. On the Operation Panel, press a button other than the
ON
button.
Page top
Page 830 of 997 pages
LCD Cannot Be Seen At All
Advertising