Integra LifeSciences Collagen Membrane, HeliMend - Manual (Page 7)

7
Instructions
1. Open outer blister tray and remove sterile inner template
“envelope” containing the sterile HeliMend membrane. (see Fig. 1)
2. Open sterile inner template “envelope” containing the
HeliMend membrane. (see Fig. 2)
3. Carefully remove the implantable HeliMend membrane from
template “envelope.” (see Fig. 3)
4. The template is a convenience item to assist in shaping the
HeliMend membrane. (see Fig. 4)
5. The template is not implantable and must be discarded
following modification of the HeliMend membrane.
6. The HeliMend membrane is then placed over the defect.
Figure 1 Figure 2
Figure 3 Figure 4