Dako Artisan™ Link Pro - Manual (Page 19)

Dako Artisan™ Link | Basic User Guide 11
Section 3 | Adding Slides in the New Slides Tab
The New Slides tab allows you to add slides for a case as well as specify the staining protocol and
requirements for each slide.
There are five basic steps to follow when entering slides for a new case:
1. Enter case and patient information
2. Enter slide information
3. Edit slides details, if necessary
4. Print and apply slide labels
5. Complete the case
Before You Begin
If the refrigerated reagents are not at room temperature:
1. Bring the refrigerated reagents that need to be used to ambient (room) temperature
before staining (45 minutes to one hour).
Note: All Dako staining reagents are validated at room temperature. Using cold reagents
may cause non specified staining to occur.
2. Prepare wash solution: Using the 50X wash solution, follow the package insert to make the
correct dilution using laboratory grade water.
Step 1: Enter Patient Case Information
In the New Slides Tab, you enter two types of information.
 Under Patient case, you can enter case and patient information.
 Under Slides, you can enter slide information.